Interlogix DVR 41 User Manual - Manual (Page 50)

5BChapter 6: Controlling a PTZ camera
44 TruVision DVR 41 User Manual
Calling up presets, tours and shadow tours
When in live view you can quickly call up the list of existing presets, preset tours
and shadow tours by using the front panel, remote control, mouse and keypad.
Front panel Press the joystick to Enter. PTZ control panel appears.
Mouse Right-click the mouse on the desired camera image. The quick access
toolbar appears. Click the PTZ control icon to enter PTZ mode. The PTZ
control panel appears.
Remote control Press the OK button. The PTZ control panel appears.
Keypad Press the Enter button on the keypad. For further information, see
Appendix D “KTD-405 keypad” on page 155.
If the display was in multiview format, it changes to full screen format for the
selected camera. See Figure 21 below for a description of the PTZ control panel.
Figure 21: PTZ control panel
Table 14: Description of the PTZ control panel
Item Name Description
1. Directional pad/auto-
scan buttons Controls the movements and directions of the PTZ. Center button
is used to start auto-pan by the PTZ dome camera.
2. Zoom, focus and iris Adjusts zoom, focus and iris.
3. PTZ movement Adjusts the speed of PTZ movement.
4. Toolbar Turns on/off camera light.
Turns on/off camera wiper.
Zoom area.
Centers the PTZ dome camera image. This command is
not supported on all PTZ dome cameras.
Jumps to the home position.