Interlogix DVR 41 User Manual - Manual (Page 120)

11BChapter 12: Network settings
114 TruVision DVR 41 User Manual
Figure 38: UPnP manual configuration screen (browser shown)
To enable UPnP:
1. Connect the DVR to the router.
Note: The router must support UPnP and this option must be enabled.
2. Click the Network settings icon in the menu toolbar.
3. Click UPnP and enable the option.
4. From Mapped Type, select Auto or Manual.
If Manual is selected, enter the external ports and IP addresses required.
5. Click Apply .