Interlogix DVR 41 User Manual - Manual (Page 36)

4BChapter 5: Live view
30 TruVision DVR 41 User Manual
The DVR automatically checks the monitor outputs used. If more than one
monitor is connected, it then defines which monitor is the main one and which is
the auxiliary. The priority level for main and spot outputs is HDMI > VGA >
CVBS. See Table 6 below.
Table 6: Monitor output priority level
Monitor output in use Priority level
HDMI VGA CVBS Main monitor Spot monitor
X X HDMI CVBS
X X VGA CVBS
X CVBS
To select the video output of the main monitor:
1. Click the Display Mode Settings icon in the menu toolbar.
2. Select Layout > General .
3. From Video Output Interface , select which monitor will be the main monitor:
HDMI (depends on DVR model), VGA, main CVBS, or spot output. VGA is
default, if connected.
To control a monitor:
On the front panel, press button A to select the main monitor. Press button B
to select the spot monitor.
Audio output
The HDMI monitor connector on the back panel outputs both video and audio
signals. There are audio outputs on the back panel for speakers.
Controlling live view
Many features of the live view can be quickly accessed by placing the cursor on
a live image and clicking the right-button of the mouse. The mouse menu
appears (see Figure 12 on page 31).