Interlogix DVR 41 User Manual User Manual
Page 102
9BChapter 10: Recording
96
TruVision DVR 41 User Manual
Note: You must set the storage mode of the HDD to Group before configuring
the redundancy. See “Setting up HDD groups” on page 122 for more
information.
To set up HDD redundancy:
1. Click the
System Setting
icon in the menu toolbar and select
Hard Disk
.
2. Click the
HDD Information
tab and select the HDD to be used for
redundancy and click
Edit
.
3. In the Local HDD Settings window, select
Redundancy
.
Verify at least one other HDD is set to R/W (read/write).
4. Click
Apply
to save the settings and then
OK
return to the previous screen.
5. In the menu toolbar, click the
Video Schedule
>
Encoding
.
6. Select the camera to be used for redundancy.
7. Check
Redundant Record/Capture
.
8. Click
Apply
to save the settings.
9. Repeat steps 7 to 9 for other cameras whose files you would like to be
redundantly recorded.
10. Click
Back
to return to live view.
Note: The HDD set to redundancy stores an extra copy of the recording.
When an HDD is set to redundancy, at least one other HDD must be set to
the R/W status.