Interlogix DVR 41 User Manual - Manual (Page 119)

11BChapter 12: Network settings
TruVision DVR 41 User Manual 113
Option Description
Select receivers Select an e-mail recipient. Up to three receivers can be selected.
Receiver Enter the name of the receiver of the e-mail.
Receiver’s address Enter the e-mail address of the receiver.
Enable attached snapshot Check the Attach JPEG File box if you want to send an e-mail
with attached alarm images.
Interval Select an interval range in the Interval box.
The interval range represents the time range in between the
alarm images being sent. For example, if you set the interval
range at two seconds, the second alarm image will be sent two
seconds after the first alarm image
3. Click Test to the test e-mail settings.
Note: We recommend that you test the e-mail settings after entering values in
the e-mail window.
4. Click Apply to save the settings.
Configuring UPnPTM
The DVR supports UPnP
TM
(Universal Plug and Play). This feature lets the DVR
automatically configure its own port forwarding, if this feature is also enabled in
the router.
You can select one of two methods to set up UPnP:
Automatic mapped type: The DVR automatically uses the free ports available
that were set up in the Network Settings menu.
Manual mapped type: You enter the particular external port settings and IP
addresses required to connect to the desired router (see Figure 38 on page 114).