Interlogix DVR 41 User Manual - Manual (Page 39)

4BChapter 5: Live view
TruVision DVR 41 User Manual 33
Figure 13 : Multiview display formats
To select a multiview format:
1. Press the Display button on the front panel to cycle through different display
formats.
You can also right-click the mouse and select Multi Camera from the menu.
Select the desired multiview display layout.
Sequencing cameras
The sequencing feature allows a camera to be displayed briefly on screen,
before advancing to the next camera in the sequence list. Sequencing can only
be done in full screen mode.
The default sequence displays each camera in numerical order. However, each
camera on the main and spot monitors can have a pre-programmed dwell time
and sequence order. See “Changing the camera sequence” on page 37 for more
information.
Note: Dwell time must not be set to zero for sequencing to function.
Sequencing live view mode using the front panel:
1. Select the camera where you want to start sequencing.
2. Press the Seq button on the front panel to start sequencing.
3. Press the Seq button again to stop the sequencing.
Sequencing live view mode using the mouse:
1. Select the camera where you want to start sequencing.
2. Right-click the mouse and select Start auto-switch to start the sequencing.
3. Right-click the mouse and select Stop auto-switch to stop the sequencing.