Interlogix DVR 41 User Manual - Manual (Page 116)

11BChapter 12: Network settings
110 TruVision DVR 41 User Manual
Option Description
Enable DHCP Check this box if you have a DHCP server running and want
your DVR to automatically obtain an IP address and other
network settings from that server.
Default value is Enable.
IPv4 address Enter the IP address for the DVR.
Default value is 192.168.1.82.
IPv4 subnet mask Enter the subnet mask for your network so the DVR will be
recognized within the network.
Default value is 255.255.255.0
IPv4 default gateway Enter the IP address of your network gateway so the DVR will
be recognized within the network. This is typically the IP address
of your router.
Default value is 192.168.1.1
IPv6 address 1 Enter the IPv6 address for the DVR.
Default value is fe80::240:3dff:fe7e:926f/64.
IPv6 address 2 Enter the IPv6 address for the DVR.
IPv6 default gateway Enter the IPv6 address of your network gateway so the DVR will
be recognized within the network. This is typically the IP address
of your router.
MAC address Enter the MAC address.
MTU (bytes) Enter a value between 500 and 9676. Default is 1500.
Preferred DNS server Enter the preferred domain name server to use with the DVR.
Alternate DNS server Enter the alternate domain name server to use with the DVR.
3. Click Apply to save the settings.
Configuring PPPoE
You can connect the DVR directly to a DSL modem. To do this, you need to
select the PPPoE option in the network settings. Contact your ISP to get the user
name and password.
To configure general network settings:
1. Click the Network settings icon in the menu toolbar to display its screen.
2. Click PPPoE and check the enable PPPoE box.
3. Enter your user name and password, and confirm the password.
4. Click Apply to save the settings.