IC Realtime Specialty: 4-CH H.264E CUBE REAL-TIME DVR with BUILT-IN 5.6 LCD - Manual (Page 97)

97
Setting includes the following items:
—
General
— Encode setup
— Schedule
— RS232
— Network
— MUL-DDNS
— FTP
— Alarm setup
— Detect
— Pan/Tilt/Zoom
— Tool
Please note: setups for different device series may vary. Please refer to the
corresponding user’s manual.
z
General
General interface is shown as in Figure 7-25.
—
System time: Here is for you to modify system time. Please click Save after your
modification
— Data format: Here you can select data format from the dropdown list.
— Data separator: Please select separator such as – or /.
— Time format: there are two options: 24-H and 12-H.
— HDD full: there are two options: stop recording or overwrite the previous files
when HDD is full.
— Pack duration: Here you can select file size. Default setup is 60 minutes.
— Device No.: when you are using one remote control to manage multiple DVRs,
you can give these DVRs serial numbers respectively. Click address button in
your remote control and then input the correct device number, now you can
control the DVR now.
— Video standard: PAL. (for your reference only)