beautypg.com

3 setting, 1 general, Setting – IC Realtime Specialty: 4-CH H.264E CUBE REAL-TIME DVR with BUILT-IN 5.6 LCD User Manual

Page 56: General

background image

56

Figure 5-1

5.3 Setting

In main menu, highlight setting icon and double click mouse. System setting
interface is shown as below. See Figure 5-2.

Figure 5-2

5.3.1 General

General setting includes the following items. See Figure 5-3.
z

System time: here is for you to set system time

z

Date format: there are three types: YYYYY-MM-DD: MM-DD-YYYYY or DD-MM-

YYYY.

z

Date separator: there are three denotations to separate date: dot, beeline and

solidus.

z

Snapshoot: Here you can set image upload interval. (This function applies to

some series only).

z

DST: Here you can set DST time and date. Please enable DST function and then

click set button. You can see an interface is shown as in Figure 5-4. Here you can
set start time and end time by setting corresponding week setup. In Figure 5-4,
enable date button, you can see an interface is shown as in Figure 5-5. Here you
can set start time and end time by setting corresponding date setup.

z

Time format: there are two types: 24-hour mode or 12-hour mode.