9 display, Display – IC Realtime Specialty: 4-CH H.264E CUBE REAL-TIME DVR with BUILT-IN 5.6 LCD User Manual
Page 69
69
Figure 5-24
5.3.9 Display
Display setup interface is shown as below. See Figure 5-25.
z
Transparency: Here is for you to adjust transparency. The value ranges from 128
to 255.
z
Channel name: Here is for you to modify channel name. Please note all your
modification here only applies to DVR local end. You need to open web or client
end to refresh channel name.
z
Time display: You can select to display time or not when system is playback.
z
Channel display: You can select to display channel name or not when system is
playback.
z
Overlay information: System displays some information in the screen for your
reference.
z
Display mode: you can select from the dropdown list: self-adaptive/VGA/TV.
z
Enable tour: activate tour function.
z
Interval: Input proper interval value here. The value ranges from 5-200 seconds.
In tour process, you can use mouse or click Shift to turn on window switch
function.
Stands for opening switch function,
stands for closing switch
function.
z
Motion tour type: System support 1/4 window tour.
z
Alarm tour type: System support 1/4 window tour.
Please highlight icon
to select the corresponding function.
After all the setups please click save button, system goes back to the previous menu.