2 abnormity, 3 alarm output, Abnormity – IC Realtime Specialty: 4-CH H.264E CUBE REAL-TIME DVR with BUILT-IN 5.6 LCD User Manual
Page 73: Alarm output
73
Figure 5-31
5.5.2 Abnormity
Abnormity interface is shown as in Figure 5-32.
z
Event type: There are several options for you such as disk error, no disk and
etc.
z
Alarm output: alarm activation output port (multiple choices), among which is
controllable 12V output.
z
Latch: here you can set corresponding delaying time. The value ranges from 10s-
300s. System automatically delays specified seconds in turning off alarm and
activated output after external alarm cancelled.
z
Show message: system can pop up the message in the local screen to alert
you when alarm occurs.
z
Send email: System can send out email to alert you when alarm occurs.
Figure 5-32
5.5.3 Alarm
Output
Here is for you to set proper alarm output.
Please highlight icon
to select the corresponding alarm output. See Figure 5-33.
After all the setups please click OK button, system goes back to the previous menu.