Haltech F10X - Manual (Page 78)

F10X Manual
78
11.2 The PWM Options Page
The PWM options page contains the set-up information for the four PWM (pulse width
modulation) outputs and the Digital output options. The PWM options page is accessed via
the options menu or using: CTRL-O from anywhere in the programming software.
The PWM output window contents change depending on the function it is to perform. A
comprehensive description of these functions can be found in CHAPTER 12 Digital Outputs
& PWM Outputs, p85.
To change the PWM output function select the required parameter from the drop down box.
When the user clicks on the Properties button the parameters pertaining to that function will
be displayed. Once the desired properties have been entered the user click on the Apply or OK
button, or they hit the enter key. Note this has to be done for both the PWM options and the
properties.