Haltech F10X - Manual (Page 29)

F10X Manual
29
3.1.2.2 Fuel Correction Maps
Fuel correction maps allow the ECU to calculate corrections to the amount of fuel injected
based on the information received from the engine sensors.
The fuel correction maps menu item will open a sub-menu that allows access the fuel
correction maps:
- Coolant Temperature
- Air Temperature
- Battery Voltage
- Coolant Temperature Prime
- Post
Start
- Barometric Pressure
- Gas Temperature (used for Gas (LPG or similar) fuel vehicles)
- Gas Pressure (used for Gas (LPG or similar) fuel vehicles)
The Set-up Menu
The set-up menu allows access to the ECU set-up pages (which contain most of the
information about the engine that the ECU is to control) and the program set-up page.
The set-up menu contains:
- Main Set-up CTRL-M
- Fuel Set-up
- Trigger Setup
- In/Out Set-up
- Throttle Setup
- ComPort Setup
- Set Password
- Screen Colour
3.1.3 The Options Menu
The options menu allows access to the option pages. The options set-up pages allow the user
to modify the setting for idle control, closed loop O2 Control and the 4 PWM channels and
any available digital outputs.
The options menu contains:
- Idle Speed Control
- Closed Loop O
2
control
- PWM and Digital Output options
- Throttle
Pump
- Injector trims
- Log Data (CTRL – D)
- View Data Log
Further description of the contents of the options menu is distributed throughout the manual.