Futaba 3PJS - Manual (Page 85)

85
Setup Mode Functions
Tilt Mixing
Use this function when you want to apply both directions mixing from steering to
channel 3 and from channel 3 to steering with boats.
1. Call the Set-Up mode screen
by pressing the UP and
DOWN keys simultaneously
at the initial screen.
2. Call the Tilt Mixing screen by
pressing the UP or DOWN
keys in function map order.
3. Set tilt mixing to ON with the +
or - key.
4. (Steering -> channel 3 mixing
rate setting)
Call the set-up screen by
pressing the SELECT switch
once.
5. Adjust the mixing rate with the
+ or - key.
Setting range: -100~0~+100%
- Return to the initial value
(+100%) by pressing the + and -
keys simultaneously for about one
second.
+: Operates in the same direction as steering
-: Operates in the opposite direction of steering
6. (Channel 3 -> steering mixing
rate setting)
Call the set-up screen by
pressing the SELECT key
once.
7. Adjust the mixing rate with the
+ or - key.
Setting range: -100~0~+100%
- Return to the initial value (-
100%) by pressing the + and -
keys simultaneously for about one
second.
+: Operates in the same direction as channel 3
-: Operates in the opposite direction of channel 3
DIRECT ST.EXP M.SEL
UP +
SETUP RESET
SELECT DOWN -
TH.EXP ATV CUSTOM
DIRECT ST.EXP M.SEL
UP +
SETUP RESET
SELECT DOWN -
TH.EXP ATV CUSTOM
DIRECT ST.EXP M.SEL
UP +
SETUP RESET
SELECT DOWN -
TH.EXP ATV CUSTOM
DIRECT ST.EXP M.SEL
UP +
SETUP RESET SELECT DOWN -
TH.EXP ATV CUSTOM
DIRECT ST.EXP M.SEL
UP +
SETUP RESET
SELECT DOWN -
TH.EXP ATV CUSTOM
DIRECT ST.EXP M.SEL
UP +
SETUP RESET
SELECT DOWN -
TH.EXP ATV CUSTOM
DIRECT ST.EXP M.SEL
UP +
SETUP RESET
SELECT DOWN -
TH.EXP ATV CUSTOM