Futaba 3PJS - Manual (Page 92)

92
SETUP Mode Functions
Battery Fail Safe (PCM Mode Only)
This function will move the throttle servo to the preset Fail Safe position when the
receiver battery voltage drops below a specified value. See page 91 for a description
of the Fail Safe function.
Battery Fail Safe Reset
When the battery voltage recovers, the Battery Fail Safe
function is reset.
1. Call the Set-Up mode screen
by pressing the UP and
DOWN keys simultaneously
at the initial screen.
2. Call the Battery Fail Safe
function screen by pressing
the UP or DOWN keys in
function map order.
3. (Function ON/OFF selection)
Select ON or OFF with the +
or - key.
Setting range: OFF, ON
4. At the end of adjustment,
press the UP and DOWN
keys simultaneously. Or
press the DIRECT key twice.
(The display returns to the ini-
tial screen.)
(This function can be used only with PCM1024 system receivers.)
DIRECT ST.EXP M.SEL
UP +
SETUP RESET SELECT DOWN -
TH.EXP ATV CUSTOM
DIRECT ST.EXP M.SEL
UP +
SETUP RESET
SELECT DOWN -
TH.EXP ATV CUSTOM
DIRECT ST.EXP M.SEL
UP +
SETUP RESET
SELECT DOWN -
TH.EXP ATV CUSTOM
DIRECT ST.EXP M.SEL
UP +
SETUP RESET
SELECT DOWN -
TH.EXP ATV CUSTOM