Futaba 3PJS - Manual (Page 48)

48
Select Mode Functions
5. Adjust the throttle servo neu-
tral position with the + or -
key. - Return to the initial value (0%) by
pressing the + and - keys simulta-
neously for about one second.
6. (Channel 3 setting)
Press the SELECT key once.
The display switches to the
CH3 set-up screen.
Setting range: U100~0~D100%
“U”: Up side, “D”: Down side
- Install the servo horn in accordance with the kit in-
struction manual, the same as steering and throttle.
7. Adjust the CH3 servo neutral
position with the + or - key.
- Return to the initial value (0%) by
pressing the + and - keys simulta-
neously.
8. At the end of adjustment.
press the DOWN key once, or
press the DIRECT key twice.
(The display returns to the ini-
tial screen.)
Blink
DIRECT ST.EXP M.SEL
UP +
SETUP RESET
SELECT DOWN -
TH.EXP ATV CUSTOM
DIRECT ST.EXP M.SEL UP +
SETUP RESET
SELECT DOWN -
TH.EXP ATV CUSTOM
DIRECT ST.EXP M.SEL
UP +
SETUP RESET
SELECT DOWN -
TH.EXP ATV CUSTOM
DIRECT ST.EXP M.SEL UP +
SETUP RESET
SELECT DOWN -
TH.EXP ATV CUSTOM