2 times, Blink – Futaba 3PJS User Manual

Page 38

Direct Mode Functions

5. To adjust the CH3 up side,

set the CH3 dial to full up
(100%) and adjust the rate
with the + and - keys.

Setting range; 0~100%

- Return to the initial value (100%) by pressing the + and - keys
simultaneously for about one second.

100%

6. At the end of adjustment,

press the DIRECT key twice.
(Returns to the initial screen.)

- 2 times

Maximum travel

The CH3 ATV determines the CH3 maximum servo travel. However, when the func-
tions below are adjusted, the maximum travel may exceed the limit set by the ATV.
Be sure to inspect you linkage installation after any adjustment is made.

- CH3 subtrim
- Programmable mixing (When CH3 is set to the slave side.)
- Tilt mixing

Note

When the CH3 servo travel is insufficient even when ATV was increased to DOWN
100% and UP 100%, the travel can be increased somewhat by using programmable
mixing. (See Page 84.)

Blink

DIRECT

ST.EXP

M.SEL

SETUP

RESET

SELECT

DOWN

TH.EXP

ATV

CUSTOM