Futaba 3PJS - Manual (Page 49)

49
Select Mode Functions
Steering Speed
Quick steering operation will cause momentary understeering, loss of speed, or spin-
ning. This function is effective in such cases.
Understeering
Spin
Smooth cornering
Steering speed not set Steering speed set
Operation
- This function limits the maximum speed of
the steering servo. (Delay function)
- The steering speed when the steering wheel
is operated (TURN direction) and returned
(RETN direction) can be independently set.
TURN direction
Turning speed adjustment range
(Approx. 1.5 to 0.1 secs)
Stick operation
RETN direction
Return speed adjust-
ment range (Approx. 1.5
to 0.1 secs)
- If the steering wheel is turned
slower than the set speed, the steer-
ing servo is not affected.
Time
1. (TURN direction setting)
Call the steering speed func-
tion set-up screen by press-
ing the UP key twice at the ini-
tial screen.
- 2 times
Setting range: 1~100%
At 100% there is no delay.
At 1%, the delay is approximately
1.5 seconds.
Servo operation is delayed.
2. Adjust the steering servo
TURN direction delay with the
+ or - key.
(The RETN direction setting
is affected.)
- Return to the initial value (100%) by pressing the + and - keys
simultaneously for about one second.
3. (RETN direction setting)
Press the SELECT key once.
Setting range: 1~100%
At 100%, there is no delay.
At 1%, the delay is approximately
1.5 seconds.
Servo operation is delayed.
Blink
Blink
DIRECT ST.EXP M.SEL
UP +
SETUP RESET
SELECT DOWN -
TH.EXP ATV CUSTOM
DIRECT ST.EXP M.SEL
UP +
SETUP RESET SELECT DOWN -
TH.EXP ATV CUSTOM
DIRECT ST.EXP M.SEL
UP +
SETUP RESET SELECT DOWN -
TH.EXP ATV CUSTOM