Futaba 3PJS - Manual (Page 39)

39
Direct Mode Functions
Steering EXP
This function is used to change the sensitivity of the steering servo around the neutral
position. It has no effect on the maximum servo travel.
Racers Tip
When the setting is not determined, or the characteristics of
the model are unknown, start with 0%. (When EXP is set to
0%, servo movement is linear.)
1. Access the DIRECT mode by
pressing the DIRECT key.
2. Call the Steering EXP func-
tion set-up screen by press-
ing the STEXP key.
Setting range; -100~0~+100%
3. To make the servo movement
more sensitive (quick), adjust
with the + key. To make the
servo movement less sensi-
tive (mild), adjust with the -
key.
- Return to the initial value (0%) by pressing the + and - keys simul-
taneously for about one second.
(Quick)
(Mild)
Servo travel Servo travel
0% (normal)
+1% ~ +100% (quick) 0% (normal)
-1% ~ -100% (mild)
Steering wheel travel Steering wheel travel
4. At the end of adjustment,
press the DIRECT key twice.
(Returns to the initial screen.)
- 2 times
DIRECT ST.EXP M.SEL
UP +
SETUP RESET SELECT DOWN -
TH.EXP ATV CUSTOM
DIRECT ST.EXP M.SEL UP +
SETUP RESET
SELECT DOWN -
TH.EXP ATV CUSTOM
DIRECT ST.EXP M.SEL
UP +
SETUP RESET
SELECT DOWN -
TH.EXP ATV CUSTOM
DIRECT ST.EXP M.SEL
UP +
SETUP RESET
SELECT DOWN -
TH.EXP ATV CUSTOM