Futaba 3PJS - Manual (Page 66)

66
SELECT Mode Functions
Up Timer/Down Timer Operating Instructions
Blink
- 2 times
(Start/stop)
When the timer switch (initial setting: PSH) is pressed, the timer starts.
When the timer switch is pressed again, the timer stops. The time can be
accumulated by repeating these start and stop operations.
1. Press the DOWN key two
times at the initial screen. The
timer screen is called.
UP: Up timer
DN: Down timer
2. Press the + and - keys simul-
taneously for about one sec-
ond. The timer is reset.
3. To end resetting, press the
UP key two times. (Return to
initial screen.)
DIRECT ST.EXP M.SEL
UP +
SETUP RESET
SELECT DOWN -
TH.EXP ATV CUSTOM
- 2 times
DIRECT ST.EXP M.SEL
UP +
SETUP RESET SELECT DOWN -
TH.EXP ATV CUSTOM
DIRECT ST.EXP M.SEL
UP +
SETUP RESET
SELECT DOWN -
TH.EXP ATV CUSTOM
(Reset)
Blink
Starting Linked With Throttle Trigger
The timer is started by the following method. (Other operations are the
same as the operating instructions given above.)
1. Press the DOWN key two
times at the initial screen. The
timer screen is called.
UP: Up timer
DN: Down timer
2. (Setting the ready state)
Press the + and - keys simul-
taneously for about one sec-
ond at the timer screen.
READY is displayed and the
timer enters the ready state.
(Start/stop)
Blink
Blink
When the throttle trigger is moved to the forward side, the timer starts .
Thereafter, the timer is started and stopped and the time is accumulated
by timer switch (initial setting: PSH) operation.
(Resetting)
(Same as described above.)
DIRECT ST.EXP M.SEL
UP +
SETUP RESET
SELECT DOWN -
TH.EXP ATV CUSTOM
- 2 times
DIRECT ST.EXP M.SEL
UP +
SETUP RESET
SELECT DOWN -
TH.EXP ATV CUSTOM