Futaba 3PJS - Manual (Page 52)

52
Select Mode Functions
5. (Pumping cycle setting)
CYCL
Press the SELECT key once.
The pumping cycle set-up
screen is called.
6. Adjust the pumping cycle with
the + or - key.
- The smaller the value, the
shorter the pumping cycle.
Setting range: 1~30
- Return to the initial value (15) by
pressing the + and - keys simulta-
neously for about one second.
7. (Pumping duty ratio setting)
Press the SELECT key once.
The pumping duty ratio set-
up screen is called.
8. Adjust the pumping duty ratio
with the + or - key.
(Reference)
Low grip: - side
High grip: + side
- Return to the initial value (0) by
pressing the + and - keys simulta-
neously for about one second.
Braking time is long
(Brakes lock easily)
Braking time is short
(Brakes do not lock easily)
9. (Delay setting)
Press the SELECT key once.
The delay set-up screen is
called.
Blink
10.Adjust the delay with the + or
- key.
Delay:
Function that increases the time
before A.B.S. is activated when
the throttle trigger is pushed to
the brake side.
Setting range: 0~100%
- Return to the initial value (0%) by pressing the + and - keys simul-
taneously for about one second.
Note: (When throttle trigger pushed to brake side)
DLY=0%: A.B.S. activated immediately
DLY=10%: A.B.S. activated after 0.14 second delay
DLY=50%: A.B.S activated after 0.7 second delay
DLY=100%: A.B.S. activated after 1.4 seconds delay
Blink
Blink
-3 0 +3
Setting range: -3~0~+3
DIRECT ST.EXP M.SEL
UP +
SETUP RESET SELECT DOWN -
TH.EXP ATV CUSTOM
DIRECT ST.EXP M.SEL UP +
SETUP RESET
SELECT DOWN -
TH.EXP ATV CUSTOM
DIRECT ST.EXP M.SEL
UP +
SETUP RESET
SELECT DOWN -
TH.EXP ATV CUSTOM
DIRECT ST.EXP M.SEL
UP +
SETUP RESET
SELECT DOWN -
TH.EXP ATV CUSTOM
DIRECT ST.EXP M.SEL
UP +
SETUP RESET
SELECT DOWN -
TH.EXP ATV CUSTOM
DIRECT ST.EXP M.SEL
UP +
SETUP RESET SELECT DOWN -
TH.EXP ATV CUSTOM