Futaba 3PJS - Manual (Page 83)

83
Setup Mode Functions
12.(Trim setting)
Call the trim set-up screen by
pressing the SELECT key
once.
13.Select ON or OFF with the +
or - key.
Setting range: ON, OFF
ON: Trim is added
OFF: Trim is removed
14.(Offset setting)
Call the offset set-up screen
by pressing the SELECT key
once.
15.Set the master channel offset
point with the + or - key.
Setting range: -100~+100%
- Return to the initial value (50%)
by pressing the + and - keys si-
multaneously for about one sec-
ond.
16.(Master mixing mode setting)
Call the set-up screen by
pressing the SELECT key
once.
17.Select ON or OFF with the +
or - key.
Setting range: ON, OFF
OFF: The slave side operates in proportion to master channel operation
ON: The slave side operates by adding the set value of the related function at the master channel side.
CH1: Steering speed, ATV, EXP
CH2: Throttle preset, ABS, ATV, EXP, throttle acceleration
CH3: ATV
18.At the end of adjustment,
press the UP and DOWN
keys simultaneously. Or
press the DIRECT key twice.
(The display returns to the ini-
tial screen.)
DIRECT ST.EXP M.SEL
UP +
SETUP RESET
SELECT DOWN -
TH.EXP ATV CUSTOM
DIRECT ST.EXP M.SEL
UP +
SETUP RESET
SELECT DOWN -
TH.EXP ATV CUSTOM
DIRECT ST.EXP M.SEL
UP +
SETUP RESET SELECT DOWN -
TH.EXP ATV CUSTOM
DIRECT ST.EXP M.SEL
UP +
SETUP RESET
SELECT DOWN -
TH.EXP ATV CUSTOM
DIRECT ST.EXP M.SEL
UP +
SETUP RESET
SELECT DOWN -
TH.EXP ATV CUSTOM
DIRECT ST.EXP M.SEL
UP +
SETUP RESET
SELECT DOWN -
TH.EXP ATV CUSTOM
DIRECT ST.EXP M.SEL
UP +
SETUP RESET
SELECT DOWN -
TH.EXP ATV CUSTOM