3 installation, 4 installation warnings – EVCO EVXV815P7 Installer manual User Manual
Page 13
EVCO S.p.A.
EVXV 800 range | Installer manual ver. 1.2 | Code 144XV800E124
page 13 of 66
3.3
Installation
Back panel via M3 studs
3.4
Installation warnings
-
make sure that the device work conditions (temperature of use, humidity, etc.) lie within the limits indicated;
see chapter 14 "TECHNICAL DATA".
-
do not install the device near to any heat sources (heating elements, hot air ducts etc.), equipment containing
powerful magnets (large diffusers, etc.), areas affected by direct sunlight, rain, humidity, excessive dust,
mechanical vibrations or shocks.
-
in compliance with Safety Standards, the device must be installed correctly and in a way to protect against any
contact with electric parts; all parts that ensure protection must be fixed in a way that they cannot be removed
without the use of tools.