Comtrol ES7528 - Manual (Page 73)

RocketLinx ES7528 User Guide: 2000509 Rev. C Aggregation Status - 73
Configuration Using the Web Interface
Aggregation Status
The Port Trunk - Aggregation Information page shows the status of port aggregation. Once the aggregation
ports are negotiated, you see the following status.
Aggregation Status Page
Group ID Displays Trunk 1 to Trunk 8 set up.
Type
The Type is Static or LACP. Static means that LACP is disabled and
configured statically by the Administrator.
Aggregated Ports
When LACP links, you can see the member ports in the Aggregated
column.
Individual Ports
When LACP is enabled, member ports of LACP group that are not
connected to the correct LACP member ports are displayed in the
Individual column.
Link Down Ports
When LACP is enabled, member ports of LACP group that are not
linked up are displayed in the Link Down column.
Load Balance
There are several load balance types based on dst-ip (Destination IP),
dst-mac (Destination MAC), src-dst-ip (Source and Destination IP),
src-dst-mac (Source and Destination MAC), src-ip (Source IP), src-mac
(Source MAC).
Reload Click Reload to reload aggregation settings.