Comtrol ES7528 - Manual (Page 125)

RocketLinx ES7528 User Guide: 2000509 Rev. C Event Selection - 125
Configuration Using the Web Interface
Event Type: Super Ring Failure
Select Super Ring Failure to receive notification when the Redundant Ring topology has changed. The system
shorts the Relay Out and lengthen the Alarm LED.
Once you finish configuring the settings, click Apply to apply your configuration.
Event Selection
Event Types can be divided into three basic groups: System Events, PoE Events, and Port Events. System
Events are related to the overall function of the switch, whereas Port Events are related to the activity of
specific ports.
System Event Warning is sent when….
Device Cold Start Power is cut off and then reconnected.
Device Warm Start Reboot the device by CLI or web user interface.
Authentication failure An incorrect password or SNMP Community String is entered.
Time Synchronize Failure Accessing the NTP Server is failing.
Fault Relay The DO/Fault Relay is on.
Super Ring Topology
Changes
Master of Super Ring has changed or backup path is activated.