Comtrol ES7528 - Manual (Page 183)

RocketLinx ES7528 User Guide: 2000509 Rev. C Traffic Prioritization (CLI) - 183
Configuration Using the Command Line Interface (CLI)
QoS Setting (Continued)
Display – Port
Setting
Switch# show qos port-priority
Port Default Priority :
Port Priority
-----+----
1 0
2 0
3 0
4 0
5 0
6 0
7 0
8 0
9 0
10 0
…
26 0
27 0
28 0
CoS-Queue Mapping
Format
Switch(config)# qos cos-map
PRIORITY Assign an priority (7 highest)
Switch(config)# qos cos-map 1
QUEUE Assign an queue (0-7)
Format: qos cos-map priority_value queue_value.
Map CoS 0 to Queue
0 Switch(config)# qos cos-map 0 0
The CoS to queue mapping is set ok.
Map CoS 1 to Queue
1 Switch(config)# qos cos-map 1 1
The CoS to queue mapping is set ok.
Map CoS 2 to Queue
2 Switch(config)# qos cos-map 2 2
The CoS to queue mapping is set ok.
Map CoS 3 to Queue
3 Switch(config)# qos cos-map 3 3
The CoS to queue mapping is set ok.
Map CoS 4 to Queue
4 Switch(config)# qos cos-map 4 4
The CoS to queue mapping is set ok.
Map CoS 5 to Queue
5 Switch(config)# qos cos-map 5 5
The CoS to queue mapping is set ok.
Map CoS 6 to Queue
6 Switch(config)# qos cos-map 6 6
The CoS to queue mapping is set ok.
Map CoS 7 to Queue
7 Switch(config)# qos cos-map 7 7
The CoS to queue mapping is set ok.