Comtrol ES7506 - Manual (Page 55)

RocketLinx ES7506 User Guide: 2000529 Rev. F Restore the Configuration - TFTP Server Method - 55
Configuration Using the Web Interface
Restore the Configuration - TFTP Server Method
To restore a configuration file, you must open a TFTP server. If necessary, use Start the TFTP Server on Page
54.
The backup file must be located in the same directory that the TFTP server resides for this procedure to work.
1. Open the web user interface for the ES7506, open the Backup and Restore page under Basic Settings.
2. Select TFTP Server for the Restore Configuration, enter the IP
address of the TFTP server, enter the Backup File Name, and
click the Restore button.
3. Click Yes to the Confirm Dialog message.
4. Click Ok to the Success Message.
Firmware Upgrade
Note: Use this section to update the ES7506 with the latest firmware. Comtrol provides the latest firmware
on the Comtrol FTP site . Updated firmware may include new features, bug fixes, or other software
changes. Comtrol Technical Support suggests you use the latest firmware before installing the ES7506
at a customer site.Optionally, you can use PortVision DX to upload the latest firmware. If you need to
upload a new version of the Bootloader, you must use PortVision DX. You cannot use the web user
interface to upload the Bootloader.
Note: The system is automatically rebooted after you finish upgrading firmware. You should alert the
attached users before updating the firmware that network interruption may occur.
Firmware Upgrade Page
System Firmware
Version
The firmware version on the ES7506.
You should check the version number after the switch reboots.
System Firmware
Date
The build date of the firmware on the ES7506.
Firmware Upgrade
• Local File (Windows XP) - see Upgrading Firmware (Local File) on Page 56
• TFTP Server (Window Server 2003 - Windows 8.1) - see Upgrading Firmware
(TFTP Server) on Page 57