Comtrol ES7506 - Manual (Page 112)

112 - Basic Settings (CLI) RocketLinx ES7506 User Guide: 2000529 Rev. F
Configuration Using the Command Line Interface (CLI)
Backup and Restore
Backup Startup
Configuration File
Switch# copy startup-config tftp: 192.168.250.33/
default.conf
Writing Configuration [OK]
Note: To backup the latest startup configuration file, you should save current
settings to flash first. You can refer to Save to Flash on Page 93 to see
how to save settings to the flash.
In the example above, 192.168.250.33 is the TFTP server’s IP and
default.conf is name of the configuration file. Your environment may use
different IP addresses or different file name. Type target TFTP server IP
or file name in this command.
Restore Configuration
Switch# copy tftp: 192.168.250.33/default.conf startup-
config
Show Startup
Configuration Switch# show startup-config
Show Running
Configuration Switch# show running-config