Comtrol ES7506 - Manual (Page 119)

RocketLinx ES7506 User Guide: 2000529 Rev. F Power over Ethernet (CLI) - 119
Configuration Using the Command Line Interface (CLI)
Syntax poe powering-mode IEEE 802.3af/forced
Parameters
802.3af: deliver power if and only if the attached PD comply with
IEEE 802.3af
forced: deliver power no maater what PD attached
Command Mode Configuration mode
Description Set the Powering mode of PoE
Examples
Set forced powering mode
EX 1:
Switch(config)# poe powering-mode forced
Switch(config)#
Set PoE port 2 to schedule mode.
EX 2:
Switch(config)# poe powering-mode 802.3af
Switch(config)#
Syntax poe control-mode user/schedule
Parameters
user: user mode
schedule: schedule mode
Command Mode Interface mode
Description Set the control mode of port
Examples
Set PoE port 2 to user mode.
EX 1:
Switch(config)# interface fa2
Switch(config-if)# poe control-mode user
Set PoE port 2 to schedule mode.
EX 2:
Switch(config-if)# poe control-mode schedule
Syntax poe user enable/disable
Parameters
enable: enable port in user mode
disable: disable port in user mode
Command Mode Interface mode
Description
Enable/Disable the PoE of the port in user mode.
If in schedule mode, it comes into affect when the control mode
changes to user mode.
Examples
To enable the PoE function in user mode
Switch(config-if)# poe user enable
To disable the PoE function in user mode
Switch(config-if)# poe user disable