Comtrol ES7506 - Manual (Page 101)

RocketLinx ES7506 User Guide: 2000529 Rev. F Accessing the Options for a Command - 101
Configuration Using the Command Line Interface (CLI)
4. Type show ip route and press the Enter key to view the IP routing tables for the ES7506.
5. If you type list and press Enter, the ES7506 provides you information about all of the commands and
options for a mode. The following example shows the available commands and their options for User
EXEC mode.
Switch> show ip route
Codes: K - kernel route, C - connected, S - static, R - RIP, O - OSPF,
B - BGP, > - selected route, * - FIB route
S>* 0.0.0.0/0 [1/0] via 192.168.0.254, sw0.1
C>* 127.0.0.0/8 is directly connected, lo
C>* 192.0.0.0/8 is directly connected, sw0.1
ES7506> list
enable
exit
list
ping WORD
ping ip WORD
quit
show arp
show ip forwarding
show ip route
show ip route A.B.C.D
show ip route A.B.C.D/M
show ip route supernets-only
show spanning-tree statistics IFNAME
show version
telnet WORD
telnet WORD PORT
traceroute WORD
traceroute ip WORD