Kenwood TM-261A - Manual (Page 7)

SUPPLIED ACCESSORIES
Part Numlrnr Quantity
Microphone
U.S.A./Canada/
General (some): MC-53DM^ T91-0568-XX 1
China/
General (some): MC-45^
T91-0516-XX 1
DC power cable E 30-2111-XX 1
Transceiver fuse
TM-261A: 15 A F51-0017-XX 1
TM-261EJ: 4 A F51-0013-XX 1
TM-461A: 10 A F51-0016-XX 1
Mounting bracket J29-0628-XX 1
Mounting bracket screws N99-0331-XX 1 set
Wrench W01-0433-XX 1
Warrantycard
(U.S.A./Canada only) — 1
Instruction manual B62-0605-XX 1
The MC-53DM and MC-45 microphones are sold as
optional accessories also {page 53}.
CONVENTIONS FOLLOWED IN THIS MANUAL
The writing conventions described below have been
followed to simplify instructions and avoid unnecessary
repetition.
ATTENTION: Most procedures require that you press an appropriate
key in each step within approximately 10 seconds, or the previous mode
will be restored.
Instruclloii Wltattofto
Press [KEY]. Press and release KEY,
Prpcc
[KEY1]+[KEY2],
Press and hold KEY1 down,
then press KEY2.
PrpCQ
[KEY1], [KEY2].
Press KEY1 momentarily,
release KEY1, then press
KEY2.
PpgQg
[KEY]+ POWER ON.
With transceiver power OFF,
press and hold KEY, then turn
ON the transceiver power by
pressing
[POWER].
Press
[F] (1 s).
Press and hold the Function
key for 1 second or longer.
Press
[KEY] (1 s).
Press and hold KEY until the
function begins.
Press
[F], [KEY] (1 s).
Press [F] momentarily, release
[F], then press and hold KEY
for 1 second or longer.