Kenwood TM-261A - Manual (Page 38)

VFO SCAN MEMORY SCAN
D
VFO Scan allows you to scan all frequencies from the
lowest frequency to the highest frequency on the band.
The current frequency step size is used.
1 Press [VFO] (1 s), and Scan starts at the frequency
currently displayed.
• The 1 MHz decimal blinks while scanning is in progress.
2 To reverse the scan direction, turn the Tuning control or
press microphone [UPJ/[DWN].
• Upward scan:
Turn the Tuning control clockwise, or
Press microphone [UP],
• Downward scan:
Turn the Tuning control counterclockwise, or
Press microphone [DWN].
3 To cancel VFO Scan, press any key other than
microphone [UP]/[DWN].
Note: Squelch must be closed for Scan to function {page 14}.
Memory Scan allows all memory channels containing data
to be scanned.
1 Press [MR] (1 s).
• The 1 MHz decimal blinks while scanning is in progress.
• Scan starts with the channel last recalled.
2 To reverse the scan direction, turn the Tuning control or
press microphone [UP]/[DWN].
• Upward scan;
Turn the Tuning control clockwise, or
Press microphone [UP].
• Downward scan:
Turn the
Tuning control counterclockwise, or
Press microphone [DWN].
3 To cancel Memory Scan, press any key other than
microphone [UPJ^DWN],
Note:
At least 2 or more memory channels must contain data and must not
be locked out.
The squelch must be closed for Scan to function {page 14}.
32