Kenwood TM-261A User Manual
Page 18
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
® LM
Indicates whether Low (L) or Medium (M) transmit output
power is selected {page 16}. When neither “L” nor “M" is
visible, High output power is selected.
® B
Appears when the [F] button is pressed. Indicates
alternate functions of multiple-function buttons can be
accessed now.
This icon indicates the selected memory channel is
locked-out and will not be scanned by Memory Scan
{page 33).
Indicates AM receive mode is ON {page 48). AM mode is
available only on some TM-261A versions only.
® TOT
Indicates the Time-out Timer function is ON {page 46).
Blinks while accessing Menu B, ‘ТОГ’.
® APO
Indicates the Automatic Power Off function is ON
{page 46}.
BUSY
Indicates the squelch is open and the frequency is “busy”.
Also appears when the squelch is set to minimum by
turning the
SQL
control fully counterclockwise. If using
either CTCSS or DTSS, indicates the squelch is open due
to a received signal that contains the same CTCSS tone or
DTSS code that is programmed in your transceiver.
OVER
In Receive, acts as an S-meter to indicate the signal
strength of received signals. In Transmit, acts as an RF
power meter to indicate the relative transmit output power
{page 16}. Full scale represents High transmit power.
ON AIR
indicates the transceiver is in Transmit mode with a
transmit frequency selected that is within a transmit band.
12