Piping, and pumpout unit weights, Table 10 – Carrier 17/19EX User Manual
Page 333
* If a machine configuration other than 2-pass, 150 psig (1034 kPa), NIH waterbox configuration is used, refer to the Additional Cooler
Weights or Additional Condenser Weights tables,
Table 11
and
to obtain the additional dry and water weights that must be
added to the values shown in this table.
† Cooler and condenser weights shown are based upon 2-pass, nozzle-in-head (NIH) waterboxes with 150 psig (1034 kPa) covers.
Includes components attached to cooler, but does not include suction/discharge, elbow, or other interconnecting piping.
** Dry weight includes all components attached to economizer: Covers, float valves, brackets, control center (31 lb [14 kg]), and power
panel (20 lb [9 kg]). Dry weight does not include compressor weight, motor weight, or pumpdown condensing unit weight. The pumpdown
condensing unit weight is 210 lb (95 kg). For compressor and motor weights, refer to
.
†† Operating weight includes dry weight, refrigerant weight, and water weight.
Table 10 — 17/19EX Heat Exchanger, Economizer/Storage Vessel, Piping, and Pumpout Unit Weights*
(Page 1 of 2)
Cooler
Size†
Cooler Total Weight
Cooler Charge
Economizer/
Storage
Vessel
Economizer
Refrigerant
Miscellaneous
Piping
Pumpout
Unit
Dry**
Operating††
Refrigerant
Water
lb
kg
lb
kg
lb
kg
lb
kg
lb
kg
lb
kg
lb
kg
lb
kg
41
21,674
9 831
26,120
11 848
2,005
909
2,441
1 107
7,169
3 525
610
277
1,095
497
210
95
42
22,019
9 988
26,736
12 127
2,142
972
2,575
1 168
43
22,364
10 144
27,322
12 393
2,249
1 020
2,709
1 229
44
23,841
10 814
29,836
13 533
2,710
1 229
3,285
1 490
45
25,032
11 354
30,790
13 966
2,752
1 248
3,006
1 363
7,900
3 583
844
383
1,149
521
46
25,529
11 580
31,658
14 360
2,937
1 332
3,192
1 448
47
26,025
11 805
32,496
14 740
3,093
1 403
3,378
1 532
48
28,153
12 770
36,053
16 353
3,727
1 691
4,173
1 893