Kenmore 200 - Manual (Page 85)

Cleaning the Hook Area
Press the up/down needle button to raise the needle, then
unplug the sewing machine.
Q] Remove the set screw (T) on the left hand side of the
needle plate ® with the screwdriver supplied with the
machine. Remove the needle plate ®.
[U Take out the bobbin. Lift up the bobbin holder (3) and
remove it.
U] Clean the bobbin holder with a lint brush (J).
d] Clean the feed dog (5) and hook race ® with the lint
brush (4).
[U
Clean the hook race
(D
with a soft dry cloth @.
(You may also use a vacuum cleaner.)
(T) Set screw
(2) Needle plate
(3) Bobbin holder
(4) Lint brush
(D Feed dog
(D
Hook race
(7) Soft dry cloth
m
Assembling the Hook Race
Q] Insert the bobbin holder (T) so that the knob (2) fits next
to the stopper (|) in the hook race.
[2] Insert the bobbin.
[U Reattach the needle plate, aligning the guide holes 0 on
the needle plate with the needle plate guide pins and
tighten the screw.
0 Bobbin holder
0 Knob
0 Stopper
0 Guide holes
79