Correcting distorted stitch patterns – Kenmore 200 User Manual
Page 15
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Correcting Distorted Stitch Patterns
The sewing results of the stretch stitch patterns may vary
depending upon the sewing conditions, such as sewing
speed, type of the fabric, number of layers etc.
Always make test sewing on a scrap piece of the fabric that
you wish to use.
if decorative stitch patterns, letters, or numbers are
distorted, correct it with the feed baiancing dial.
Notes:
• In normal sewing, set the feed baiancing dial
CD
to the
neutrai position, i.e., the groove on the dial
®
is
centered with the standard setting mark (3).
• Turn the feed balancing dial
CD
with a coin.
(T) Feed baiancing dial
(D Groove on the dial
(3) Standard setting mark
• If the pattern is compressed, turn the dial in the direction
of
• If the pattern is drawn out, turn the dial in the direction
of
(T) Correct shape
Note:
Return the feed baiancing dial ® to its neutral position
when the sewing is finished.