Machine operating buttons start/stop button, Note, Reverse button – Kenmore 200 User Manual
Page 11: Auto-lock button, Up/down needle button, Speed control lever, Up/down needle button speed control lever
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Machine Operating Buttons
Start/stop Button
(T)
Start/stop button
Press the button to start or stop the machine. This button
can be used either in conventionai sewing mode or Embroi
dery mode. In conventional sewing mode, the machine
starts running slowly for the first few stitches; it then runs at
the speed set by the speed control lever.
Note:
The Start/stop button cannot be used when the foot
control is connected to the machine.
Reverse Button
(2) Reverse button
• Patterns 1,
2
,
6
and 7:1 -i- - ' .
The machine will sew in reverse while the reverse button
is pressed.
• All other patterns:
When the reverse button is pressed, the machine will sew
locking stitches immediately and automatically stop.
Auto-lock Button
(
1
)
Auto-lock button
• Patterns 1, 2,6 and 7:
When the auto-lock button is pressed, the machine will
immediately sew locking stitches and automatically stop .
• All other patterns:
When the auto-lock button is pressed, the machine will
sew locking stitches at the end of the current pattern and
automatically stop.
Up/down Needle Button
0
Up/down needle button
Press this button to bring the needle up or down.
Speed Control Lever
Sewing speed can be varied by the speed control lever
according to your sewing needs.
To increase sewing speed, slide the lever to the right.
To decrease sewing speed, slide the lever to the left.