Foot control, Operation instructions, Note – Kenmore 200 User Manual
Page 12: Pressure dial, To drop or raise the feed dogs, Pressure dial to drop or raise the feed dogs
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Foot Control
Sewing speed can be varied by the foot control.
The harder you press on the foot control, the faster the
machine runs.
Note;
The machine runs at the maximum speed set by the
speed control lever when the foot control Is being fully
depressed.
Operation Instructions;
Foot Controller Model 21371 is used with Sewing Machine
Model 385.19010XXX (XXX represents numbers 000
through 999).
Note;
The Kenmore Elite sewing machine model 19010 is
equipped with an automatic shutdown safety feature to
prevent overheating. Follow safety instructions that appear
on the visual touch screen.
г
Pressure Dial
The pressure dial should be set at “3” for regular sewing.
Reduce the pressure to “2” for applique, cut work, drawn
work, basting and embroidery.
Set the pressure to “1” when sewing chiffon, lace, organdy
and other fine fabrics.
Velour and knits with a lot of stretch may also require a “1"
setting.
Turn the pressure dial ® and set the desired number at the
setting (
2
).
® Pressure dial
(2) Setting mark
To Drop or Raise the Feed Dogs
The drop feed dogs lever is located underneath the free
arm bed on the back side of the machine.
® To drop the feed dogs, push the lever in the direction
of the arrow, as illustrated.
(|) To raise the feed dogs, push the lever in the direction
of the arrow, as illustrated, and turn the handwheel
toward you. Feed dogs must be up for normal sewing.
7
®