Kenmore 200 User Manual
Page 34
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
stretch Stitch
(D
Stitch pattern:
10
(D
Needle thread tension
3 to
6
(D
Presser foot A:
Zigzag foot
(4)
Pressure dial
3
This is a narrow stretch stitch designed to eliminate
puckering on knit fabrics and bias seams, while permitting
the seam to be pressed completely open flat.
Basting Stitch
(T) Stitch pattern:
15
(D
Needle thread tension
1
to 4
(D Presser foot A:
Zigzag foot
0 Pressure dial
1
The basting stitch is used to hold fabric layers together
during fitting. Use a fine needle so as not leave permanent
needle marks on fabrics.
Press pattern 15 on the visual touch screen. Drop the feed
dogs (see page
6
).
Depress the foot control. The machine will take one stitch
and stop automaticaiiy.
Hold the fabric taut and slide it to where you want the next
stitch, then depress the foot control again.
Continue in this manner sliding the fabric sideways or
forward.
Zipper Sewing
0 Stitch pattern:
1
0 Needle thread tension
2 to
6
0 Presser foot E:
Zipper foot
0
Pressure dial
3
To snap on the zipper foot
0
Groove
0
Pin
0
To sew left side
0
To sew right side
Fit the pin on the zipper foot into the groove on the foot
holder.
* To sew the left side of the zipper, attach zipper foot with
the right-hand side of pin.
* To sew the right side of zipper, attach the zipper foot with
the left-hand side of pin.
0
1 5
C p