ALTANA Haze-Gard Dual - Manual (Page 53)

52
English
Ref. Measurement
only in
Continuous-Mode
Memory
full
Adjusting
Calibration Values
Continue: OPERATE
Online Mode
Keyboard inactive
Cause
The “reference” button was pressed
although the device is not in
Continuous Mode.
Remedy
None, this is merely provided for
information purposes.
Cause
The current statistics memory is full.
Remedy
Delete the last value or entire
memory by pressing the “delete
last” or “delete all” button.
Cause
The RAM and EEPROM contain
different calibration data as these
were not saved following the chan-
ging of calibration values.
Remedy
The calibration data are auto-
matically transmitted from the
EEPROM to the RAM and thus the
calibration values updated again.
Cause
The measurement device is in
online mode and is hence controlled
from the PC- Only the “operate” and
referencee buttons and the “foot
switch” are released.
16 Error Messages