ALTANA Haze-Gard Dual User Manual

Page 31

Text mode
Original mode

English

reference

ISO

89.5

CONT. MODE

Standby-Mode

To add a value to the statistics,
press the “operate” button. The
following message appears on the
display:

Measurement active.

The device will then return to
Continuous Mode on completion.

If you change the material to be
tested, the transmission must be
redefined.

Indicate the change by pressing the
“reference” button.

A message on the display will
request you to place the specimen
in the haze port.

The device will then return to
Continuous Mode.

Standby

To protect the lamp, Continuous
Mode is interrupted after a certain
period if the device fails to establish
any change in the measurement
value at the beam aperture.

Measurement is continued if a
significant change is detected at the
beam inlet (e.g. placing of a
specimen).

OPERATE

Transmittance

Measurement

Please place

Sample at

haze-port

Ready:

9 Continuous Mode