ALTANA Haze-Gard Dual - Manual (Page 37)

36
English
SET UP MENU
Beeper: on
Adjust Date
Adjust Time
Display Contrast
Change Cal Value
Escape:
SET UP
10.8 Beeper
The device emits a beep signal on
completion of a measurement. The
beep signal can be switched on or
off from the “Beeper” menu item.
10.9 Adjust Date
To change the date, select “Adjust
Date” and press the “operate”
button.
The date input menu is displayed.
Use the:
buttons, to move the arrow to the
item to be changed.
Use the:
buttons to change the value in
the corresponding place.
Years prior to 1980 are not
accepted.
10 SET-UP