beautypg.com

ALTANA Micro-Wave-Scan Manual User Manual

Page 9

background image

8

Safety instructions

WARNING severe material damage

• The measurement unit consists of sensitive

optical and electronic precision parts. Prevent it

from being dropped, bumped or shaken!

• Avoid exposure to continuous humidity and

con densation. Avoid splashing with water,

chemicals or other liquids.

• Please use only accessories that are available

for the unit.

• Only devices that meet the requirements for

low voltage safety may be connected to the

interface.

Great Britain:

• When working with the batteries /rechargeable

batteries make certain there is no short circuit

on the contacts. Metallic objects must not come

in contact with the bare contacts.

• The measurement unit is a class II laser

product.

The labels shown left are on the housing and

base of the measurement unit.

Caution:
• Never look into the measurement aperture

when the device is turned on. The laser beam

can penetrate your eye and cause injuries.

(EN 60825)

USA:

Laser Light

Do not stare into beam

Class 2 Laser Product

max < 1 mW 630 – 690 nm

According to IEC 825