ALTANA Micro-Wave-Scan Manual - Manual (Page 16)

15
3.1 Rechargeable battery pack
To place the instrument in service, the recharge-
able battery pack must be inserted until it locks in
place.
The rechargeable battery pack can only be at-
tached when it is in the correct position.
When inserting the rechargeable battery pack,
ensure that its contacts are aligned with those of
the instrument. See adjacent figure.
The capacity of the rechargeable battery pack
included with delivery is sufficient for about 1000
measurements. When the voltage of the recharge-
able battery pack falls below the required operating
voltage in the course of operation, the following
message appears on the display:
“Low Battery!”
3.2 Docking station power supply
Power is supplied to the docking station through
the external power supply unit. Connect the exter-
nal power supply unit to the docking station. Con-
nect the appropriate end of the power connection
line to the power supply unit and the plug end of
the power connection line to the power outlet after
verifying that the specifications of the power supply
unit match the power source in terms of current
and voltage.
Note: To ensure uniform utilization, the rechargeb-
le battery packs should be exchanged regularly
between instrument and docking station (weekly
recommended).
Power supply