ALTANA Micro-Wave-Scan Manual - Manual (Page 8)

7
DANGER injuries possible
• Defects and extraordinary loads
If safe operation can no longer be presumed,
shut down the device and secure it against
unintended operation.
The device must be presumed unsafe to operate:
• if visible damage is evident
• if the instrument is no longer working
• if it has been stored for long periods under
adverse conditions
• after harsh treatment during shipping.
• Safety advices for batteries: Do not crush
or dismantle, do not heat or incinerate, do
not immerse in any liquid. This may cause
explosion or release harmful substances.
• Do not perform any repairs on the unit
yourself. The unit must be opened by trained
professionals only. Please contact our customer
service department in such cases.
• The measurement device may be disconnected
from any power source as follows:
a) by removing the battery compartment.
Docking station:
a)
by disconnecting the plug from the docking
station or from
b) the mains socket.
Please make certain that the power supply plug
is easily accessible. Use only the power supply
included with delivery.
Safety instructions