ALTANA Micro-Wave-Scan Manual - Manual (Page 13)

12
System description and Delivery notes
Application hints:
Measurement task
1. Single measurements, e.g.
occasional sample-measurements
2. Objects with several test zones.
Test sequence / identifikation can
be standardized, e.g. automobile or
add-on parts
3. Regular test series. Test
sequence / identifikation can be
standardized, e.g. batch control
4. Occasional test series. Test
sequence / identifikation can not be
standardized, e.g. projects
Recommendation
- Menu “Measure“>MEMORY“.
- Transfer results directly to
smart-chart.
- Generate Organizer in smart-
chart and transfer it to the
instrument.
- Take readings, see chapter
8.3.
- Transfer results to smart-
chart and store in data base.
- Data analysis smart-chart.
see 2.
- Generate new Memory
(chapter Memory, Config.
New).
- Take readings, see chapter
8.2.
- Transfer results directly to
smart-chart.