ALTANA Micro-Wave-Scan Manual - Manual (Page 27)

26
Measure
8. Measure
8.1 Measure
For beginning a new test series, select Measure
from the Main Menu. The Measure menu offers
a list of names to identify the new test series
(Parameter1). Individual entries can be added to
the list.
Two types of test procedures can be differenciated
by a symbol in front of the names:
Memories:
generated in the instrument, allow to input
identification parameters during measurement
procedure.
Organizer:
downloaded from the smart-chart software, offer a
predefined test procedure for user guidance and
identification.
A virgin instrument contains only two entries in the
menu, which can not be deleted:
MEMORY - for simple measurement of samples.
Standard - for checking the instrument on the test
tile (see chapter 6)
Select a desired item from the list to start the test
series and perform the measurements according to
section 5.
Differences between the measurement procedures
will be explained in chapter 8.2 to 8.4.