ALTANA Micro-Wave-Scan Manual - Manual (Page 49)

48
Interface
13. Interface
13.1 Connecting the measurement unit to a PC
Data transfer to and from the measurement unit
takes place through the docking station. It contains
the USB interface connecting the instrument with
a PC.
The connection point for the USB cable is located
on the back of the docking station. Plug in the
cable included with delivery.
To transfer data, the instrument must be inserted
into the docking station.
The data transfer itself takes place with the smart-
chart program, which is included with delivery.
Set up the computer and additional instruments
as described in the corresponding manuals.
To transfer data, the connection cable must be
connected to a USB port. For the position and
assignment of the socket, please refer to your
computer manual.