A&D Weighing ML-50 - Manual (Page 63)

MS-70 / MX-50 / MF-50 / ML-50 61
14.1.1. 14.1.1. 14.1.1. 14.1.1. Operation Operation Operation Operation
1. Display the gram unit (of the weighing mode).
2. Press and hold the SELECT key to enter the function table.
Select an Item Select an Item Select an Item Select an Item
3. Select an item using the following keys.
Example: Data output mode prt is selected.
SELECT key ... Selects a figure.
ENTER key..... Enters to the selected item.
RESET key ..... Cancels the operation and
returns to the weighing mode.
Select a Parameter Select a Parameter Select a Parameter Select a Parameter
4. Select a parameter using the following keys.
Example: Auto print mode prt 1 is selected.
↓
, ↑ key ............ Selects a parameter.
ENTER key..... Stores the parameter and proceeds
to the next item.
RESET key ..... Cancels the operation and returns
to the weighing mode.
5. If you want to finish the operation, press the
RESET key to return to the weighing mode.
Example, Use Comma for Decimal Point Example, Use Comma for Decimal Point Example, Use Comma for Decimal Point Example, Use Comma for Decimal Point
1. Press and hold the SELECT key to enter the function table.
2. Press the SELECT key to display dp .
3. Press the ENTER key to enter the item.
4. Press the ↓ or ↑ key to display dp "1 .
5. Press the ENTER key to store the new parameter.
6. Press the RESET key to return to the weighing
mode.
dp
0.,000
g
0.000
g
Cl adj
dp 0
dp 1
prt
Last parameter
New parameter
0.000
g
Cl adj
0.000
g
prt "0
data
prt
prt "1
Last parameter
Item
New parameter