A&D Weighing ML-50 - Manual (Page 53)

MS-70 / MX-50 / MF-50 / ML-50 51
11.2. 11.2. 11.2. 11.2. Output Format Output Format Output Format Output Format
In Case of Format omitted Temperature Data (Function Table In Case of Format omitted Temperature Data (Function Table In Case of Format omitted Temperature Data (Function Table In Case of Format omitted Temperature Data (Function Table 5555----d 0 d 0 d 0 d 0 ) ) ) )
The format consists of fifteen characters except the terminator.
A polarity sign is placed before the data with the leading zeros. If the data is zero,
the plus sign is used.
The unit is or .
The position of decimal point and minimum display are changed by models.
Sign of ASCII code
0Dh Carriage return
0Ah Line feed
20h Space
Sample Mass F Sample Mass F Sample Mass F Sample Mass Format ormat ormat ormat (Gram Display) (Gram Display) (Gram Display) (Gram Display)
Positive Overload F Positive Overload F Positive Overload F Positive Overload Format ormat ormat ormat (Too heavy weighing, (Too heavy weighing, (Too heavy weighing, (Too heavy weighing,
e ee e
display) display) display) display)
Negative Overload F Negative Overload F Negative Overload F Negative Overload Format ormat ormat ormat (Too light weighing, (Too light weighing, (Too light weighing, (Too light weighing,
- -- -e ee e
display) display) display) display)
Moi Moi Moi Moisture Content (during weighing or after weighing) sture Content (during weighing or after weighing) sture Content (during weighing or after weighing) sture Content (during weighing or after weighing)
In case of the MS-70
In case of the MX-50 or MF-50
In case of the ML-50
Header Polarity Overload Terminator
Header Mass data Unit Terminator
Header Polarity Overload Terminator
Header Moisture content Unit Terminator
Header Moisture content Unit Terminator
Header Moisture content Unit Terminator